Woods Equipment 1012, 2WD SUB-FRAME & Backhoe Removal from Tractor, Remove Backhoe With Sub-Frame

Page 15

SUB-FRAME & BACKHOE REMOVAL FROM TRACTOR

￿￿￿￿￿￿￿

Remove Backhoe With Sub-Frame

￿The only time the backhoe may be operated from a position other than the operator seat is during backhoe attachment and removal. Opera- tor must

•Read Sub-Frame Mounting Kit Manual instructions on attaching and removing back- hoe and use extreme care

•Always stand between rear tire and back- hoe stabilizer arms or along side of tractor to avoid being trapped should the boom swing control be accidentally activated.

￿Remove seat and upper support assembly before installing or removing backhoe from trac- tor. Failure to comply may result in equipment failure and/or personal injury.

1.On a hard level surface, center the backhoe boom.

2.Remove the seat assembly.

3.Remove retaining pins from front sub-frame bracket and clevis pins from rear hanger bracket OR from sub-frame hooks.

4.Start the tractor. Engage PTO pump at slow idle speed. Curl the bucket all the way towards the operator.

5.Remove transport lock.

6.Extend boom and dipperstick so that dipperstick is vertical.

7.Rest bucket on the ground and lower stabilizers to take backhoe weight off tractor. Extend boom and stabilizers to release sub-frame.

8.Keeping the bucket and stabilizers in contact with the ground, raise the rear of the backhoe to pivot the front of the sub-frame down.

NOTE: For removal, the front of the sub-frame must be low enough to clear the lowest point of the tractor. Maintain clearance throughout this procedure.

9.Move the tractor far enough to release the sub- frame from the brackets OR from the 3-point lift pins.

10.Place 6” blocks under backhoe mainframe and raise stabilizers to lower backhoe onto the blocks as shown below.

11.Disengage PTO, turn off engine, set brakes, and remove key before leaving tractor seat.

12.Remove the backhoe hydraulic pump from the PTO shaft if equipped (see Store Hydraulic Pump section), or disengage the tractor hydraulic circuit and disconnect the hydraulic quick couplers.

13.Reinstall seat assembly.

14.Make sure backhoe and sub-frame clear the trac- tor chassis. Start tractor and drive the tractor away.

NOTE: For instructions on extended storage, see backhoe operator’s manual

6” Blocks

MAN0094 (11/15/2002)

Installation 13

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MAN0094 To the Dealer Ii IntroductionTable of Contents Safety Rules SafetySafety Backhoe SUB-FRAME Installation InstallationTractor Preparation SUB-FRAME Installation Cont’dWoods 1009, 1012, 1016 Loaders Figure Install Front MountRear Hanger Bracket & Rear Mount Install Rear Hanger BracketSub-Frame Fit-Up Install Rear MountTorque Specifications Attach Sub-Frame to Backhoe Sub-Frame to Backhoe InstalledPump & Bracket Installed Install Pump KitHydraulic System Check List Mount Sub-Frame & Backhoe to TractorRemove Backhoe With Sub-Frame SUB-FRAME & Backhoe Removal from TractorStore Hydraulic Pump SUB-FRAME & Backhoe Installation to TractorParts Appendix Bolt Torque ChartAbbreviations Bolt Size ChartWarranty Model No Part Warranted Duration MAN0094

1016, 2WD, 1009, LA852-1, LB702 specifications

The Woods Equipment MX5000 is a robust and versatile piece of machinery designed for various agricultural and landscaping applications. Known for its durability and efficiency, this model stands out in the market for its innovative features and technologies that cater to both professional and amateur users. The MX5000 is engineered for performance, with a powerful hydraulic system that ensures smooth operation when handling various attachments.

One of the key characteristics of the MX5000 is its impressive lifting capacity. The robust design allows it to handle heavy loads with ease, making it an ideal choice for tasks such as lifting, moving, and tilling. The integrated hydraulic system is user-friendly, offering precise control over attachment operations. Operators can switch between different functions with minimal downtime, enhancing productivity in both agricultural and landscaping tasks.

The MX5000 is also equipped with advanced technologies that improve its operational efficiency. For instance, it features a quick-attach system that allows users to switch between different implements swiftly, reducing the time spent on equipment changes. This flexibility is particularly beneficial for users who need to tackle a variety of tasks in a single workday.

The build quality of the MX5000 is noteworthy. Constructed with high-strength materials, it is designed to withstand the rigors of daily use in demanding environments. The frame is engineered for stability, ensuring that the machine maintains its balance even when fully loaded. This sturdy construction contributes to the longevity of the equipment, making it a sound investment for users who rely on durability.

Additionally, the compact size of the MX5000 allows for enhanced maneuverability in tight spaces. Whether operating in a crowded field or navigating around obstacles, the agility of this model makes it a user-friendly choice. The compact design does not compromise its performance, as it still boasts powerful capabilities to handle various implements.

In summary, the Woods Equipment MX5000 is a standout model characterized by its exceptional lifting capacity, user-friendly hydraulic system, advanced quick-attach technology, and robust construction. This equipment is designed to meet the demands of a wide range of applications, from agriculture to landscaping, making it a valuable asset for any operator. The integration of solid engineering with high-quality materials ensures that the MX5000 provides reliable and efficient performance for years to come.
Top Page Image Contents