![](/images/new-backgrounds/1306821/306821101x1.webp)
Table
Error Code | Explanation and Action |
3C389 PC Card has not been inserted in the PCMCIA socket.
Insert your 3C389 PC Card in the socket and try again.
Change the Shared RAM base address and place it on a
During initialization, no interrupt occurred.
This can happen if you are using an enabler and it is setting an interrupt level that is different from the interrupt level TOKENCS.COM is using. Check to make sure that both interrupts are the same.
During initialization, no interrupt occurred.
This can happen if you are using an enabler and it is setting an interrupt level that is different from the interrupt level TOKENCS.COM is using. Check to make sure that both interrupts are the same.
The ROM and RAM memory areas are overlapping.
Check the settings in NET.CFG for MEM #1 and MEM #2. MEM #1 determines the ROM (MMIO) base address. MEM #2 determines the Shared RAM base address. If you are using an enabler, check where it is placing the ROM (MMIO) and the RAM address. ROM is 8 KB in size. RAM is usually 16 KB in size.
The maximum frame size has been exceeded.
Change the maximum frame size to a valid value.
The maximum frame size is too small.
Increase the maximum frame size to a valid value.
(continued)