3Com manual Installing the 3C389 PC Card

Installing the 3C389 PC Card 2-3

3Lock the cable connector to the 3C389 PC Card. Slide the latching button toward the 3C389 PC Card.

You can leave the latching button retracted, so that if the cable is yanked, the connector will disconnect from the PC Card, possibly saving your PC from being pulled off a table.

4Insert the 3C389 PC Card in the slot (Figure 2-2). If you are using a point enabler, note which slot you use.

The 3C389 PC Card can go in only one way. If you feel resistance before the 3C389 PC Card is fully inserted, remove the 3C389 PC Card, turn it over, and reinsert it.

3C389

THIS	SIDE	INSERT
		UP

TokenLinkCard		®
16/4	PC
		Velocity	™

Figure 2-2Inserting the 3C389 PC Card