3Com 3C389 manual Tokencs.Com

Error Codes 5-5

Table 5-1DOS ODI Error Codes (continued)

Error Code	Explanation and Action
TOKENCS-DOS-230	The MAX FRAME SIZE in NET.CFG file is not a multiple
	of 8.
	The maximum frame size has been set to a value that
	is not valid.
	Change the MAX FRAME SIZE to a multiple of 8.
TOKENCS-DOS-231	The MAX FRAME SIZE in NET.CFG is too big for this
	3C389 PC Card.
	The maximum value at this speed for this 3C389
	PC Card is xx.
	Change the MAX FRAME SIZE to a valid value.
TOKENCS-DOS-233	Card Services could not be found.
	TOKENCS.COM could not find Card Services.
	Check your CONFIG.SYS and ensure that Card
	Services is loading. If Card Services support is not
	wanted, take the PCMCIA keyword out of NET.CFG.
TOKENCS-DOS-235	A Card Services error has occurred.
	You have heard an alternating tone and this message
	is posted to the panel. This indicates that Card Services
	was unable to provide the resources requested.
	Check your NET.CFG parameters INT, MEM #1,
	MEM #2. If they are not in NET.CFG, Card Services
	has a problem. If they are specified in NET.CFG,
	comment (REM) them out and try again.
TOKENCS-DOS-246	The DATA RATE specified in NET.CFG must be either 4 or
	16 Mbps.
	You have specified an incorrect ring speed. It must be
	either 4 or 16 Mbps. The DATA RATE keyword is used
	to set the speed.
(no message)	Please insert a 3C389 PC Card or press [ESC] to avoid
	loading the driver.
	This message occurs when you have not inserted a
	3C389 PC Card in the machine and have started
	TOKENCS.COM.
	Insert a 3C389 PC Card at this time or press [ESC] to
	leave.