3Com 3C389 manual DOS ODI Hot-Pluggability and Suspend/Resume, DOS Ndis Hot-Pluggability

DOS ODI Hot-Pluggability and Suspend/Resume C-3

DOS ODI Hot-Pluggability and Suspend/Resume

It is recommended that you use the NetWare Event Service Layer program (NESL.COM) for hot-plugging to work in this environment. Without this support, you should use the following procedure.

Complete the following procedure to remove the 3C389 PC Card or to go into a suspend mode:

1Unload all the drivers.

Remove them in the reverse order they were installed. by typing the following commands at the DOS prompt:

netx u (“or” vlm u) ipxodi u

tokencs u lsl u

2Remove the card from your machine.

Once the card is removed, you can enter and exit suspend mode as often as you like before reinstalling the card. It is best to reinstall the card while the machine is not in suspend mode.

After reinserting the card or resuming, you can restart your network software by typing the following commands at the DOS prompt:

lsl tokencs ipxodi netx

DOS NDIS Hot-Pluggability

You can insert and remove your card before and after using Windows for Workgroups. You cannot hot-plug the card while using Windows for Workgroups. Insert the card before starting the software. Remove the card only after exiting the Windows for Workgroups environment.