3Com 3C389 manual About this Guide, How to Use This Guide, If you are looking for Turn to

ABOUT THIS GUIDE

This guide describes how to install and configure the 3Com 3C389 TokenLink Velocity PC Card, and is intended for the token ring network administrator, operator, or hardware installer. A knowledge of token ring networks and microcomputer hardware configuration procedures is required.

If the information in the README.TXT file or the Release Notes differs from the information in this guide, follow the information in the README.TXT file first, the Release Notes second, and the user guide third. The README.TXT files are on the software diskettes; the printed Release Notes are placed in the product box or inserted in the user guide when the product is packed.

How to Use This Guide

This table shows where to find specific information in this guide.

If you are looking for...	Turn to...
Features of the 3C389 TokenLink Velocity PC Card	Chapter 1
Installing the 3C389 TokenLink Velocity PC Card	Chapter 2
Installing the network device drivers for a specific operating system	Chapter 3
Using LANAID for network device driver configuration	Chapter 4
Troubleshooting and error codes	Chapter 5
Using the diagnostic utility	Chapter 5
Using a Memory Manager	Appendix A
Specifics about SystemSoft Card and Socket Services	Appendix B
Hot-Pluggability and Suspend/Resume	Appendix C
Contacting 3Com technical support	Appendix D