DOS Client 16 for Novell NetWare 4.01 and Above Installation |
OS/2 NDIS 2 device driver using LAPS installation is complete when the following conditions exist:
■The device driver files load successfully and there are no error messages.
■You are able to log on and communicate with the network.
If you experience problems, go to Chapter 5, “Troubleshooting.”
DOS Client 16 for Novell NetWare 4.01 and Above Installation
1Insert the Novell 4.01 Diskette into the floppy disk drive.
2Type:
install [Enter]
Follow the steps on the panels as they appear.
3Record the client directory name in order to do a client installation.
The default directory name is C:\NWCLIENT.
4At the Insert the driver disk window, insert TokenDisk diskette #2 and type:
a:\novell\dos [Enter]
5Select Other drivers.
6Choose 3Com TokenLink Velocity PC Card.
7At the Settings for 3Com TokenLink Velocity PC Card window, press [Esc].
8At step 5, press [Enter] to finish installing NetWare.
9Press Enter to exit the installation tool.
10Configure the 3C389 PC Card.
11If LANAID is not already installed, install it as described in Chapter 4 in the section “Installing LANAID.”
