Complete the following procedure to install LANAID on your hard disk:
1At the DOS prompt, insert TokenDisk diskette #1 in the drive and type:
a:install [Enter]
2Change the drive, path, and directory for the LANAID files, or press [Enter] to accept the default values.
The LANAID program may display a prompt requesting permission to modify the CONFIG.SYS and AUTOEXEC.BAT files. The LANAID program launches automatically after the files are and copied to the target directory.
Using LANAID to Install IBM LAN Client
LANAID must be run from DOS or full screen DOS in an OS/2 session.
1Launch LANAID.
2Click Network Software.
The Select Disk Drive window appears.
3Enter the letter of the hard disk on which you want to install IBM LAN CLient and click Continue.
The Network Operating System Choices window appears.
4Select Install IBM LAN Client and click Continue. The IBM LAN Client Installation window appears.
5Select the appropriate operating system from the drop down list box.
6Select Express Install or Custom Install. If you chose Custom Install go to step 7. If you chose Express Install go to step 9.
When you choose Express Install, NetWare
