3Com manual 1Attaching the Cable to the 3C389 PC Card

2-2CHAPTER 2: INSTALLING THE TOKENLINK VELOCITY PC CARD

If you are using Card and Socket Services, you may be able to use hot-pluggability features with your 3C389 PC Card. See Appendix C, “Hot-Pluggability and Suspend/Resume” for more information

1Turn off the power to the PC.

2Attach the cable to the 3C389 PC Card (Figure 2-1).

Retract the latch by sliding the half-circle latching button on the connector backwards toward the cable. The cable cannot be connected or disconnected unless the latch is retracted.

With the part number facing down, attach the cable connector to the 3C389 PC Card.

The connector can attach to the 3C389 PC Card in only one way. If the connector does not seem to fit, turn it over and gently try again.

The cable for the 3Com 3C689 TokenLink III PC Card is not compatible with the 3C389 PC Card.

3C389

THIS	SIDE	INSERT
		UP	TokenLinkCard
			16/4	PC

PC card

® Velocity

™

Part number (on bottom)

Latching button

Figure 2-1Attaching the Cable to the 3C389 PC Card