3Com manual Kit Contents, Installation Tips, Installing the 3C389 PC Card

2	INSTALLING THE
	TOKENLINK VELOCITY

PC CARD

Kit Contents

In addition to this manual, your kit contains the following items:

■3Com 3C389 TokenLink Velocity PC Card

■Token ring PC Card RJ-45 cable

■Five TokenDisk diskettes

■An shielded twisted pair (STP) connector for connection to STP network wiring

The 3C389 PC Card cable can be purchased separately. If you want additional cables, contact your 3Com marketing representative or your place of purchase.

Installation Tips

If you plan to use Card and Socket Services software, Version 2.0 or higher, install it and reboot your PC. The software may be provided with your PC or operating system. See Chapter 1 for a description of these services.

The README.TXT file on TokenDisk diskette #2 contains more information to help you configure and customize the 3C389 PC Card.

Installing the 3C389 PC Card

The procedures in this section explain how to physically install the 3C389 PC Card. The installation procedure is summarized by the following sequence:

■Attach the RJ-45 cable to the 3C389 PC Card.

■Insert the 3C389 PC Card into the PC.

■Plug the cable into the appropriate network port.