Windows 95 Installation |
There are two versions of Windows 95: the original version shipped in August 1995 and the OEM Sales Release 2 (OSR 2). The driver installation instructions are slightly different in the two versions.
1Determine if you have OSR 2.
Click Start, Settings, Control Panel, and System.
If the system version number is 4.00.950 B, you are using OSR 2. If it is 4.00.950 A or just 4.00.950, you are using the original version of Windows 95.
If you are running OSR 2, use the instructions in “Windows 95 OSR 2 Installation” later in this chapter. Otherwise, perform the following instructions.
2If you have not already inserted the 3C389 PC Card, insert it now with the cable attached.
The PC does not detect the 3C389 PC Card if the cable is detached.
If PCMCIA support has been started on your machine, the system will prompt you for a diskette.
If PCMCIA support has not been started on your machine, do the following sub steps.
a Click Start, Settings, and Control Panel.
b Click PC Card (PCMCIA) to start PCMCIA support, and follow the instructions given.
3Insert TokenDisk diskette #2 into the appropriate floppy drive and press [Enter].
4Type a:\win95 [Enter]
5Set the displayed parameters.
The system will list acceptable default values.
6Follow the instructions to copy the files.
Windows 95 PC Card software installation is now complete.
