3Com 3C389 manual IBM LAN Client Configuration window appears, Client or Protocol Description

Installing LANAID 4-5

7Select one or more of the clients and protocols and click Continue.

The IBM LAN Client Configuration window appears.

Table 4-1Clients and Protocol Descriptions

Client or Protocol	Description
NETWARE CLIENT 32	NetWare Client 32 is Novell’s version of client software.
(IPX/SPX)	You cannot select both NetWare Client and DOS LAN
	Services
DOS LAN SERVICES	DLS is the DOS client software for IBM LAN and Warp
(DLS)	servers. When you select DLS, you must provide the
	following information:
	User Name
	Machine ID
	Domain Name
	When you select DLS, NetBIOS is automatically
	selected as well. You cannot select both DLS and
	NetWare Client
NetBIOS	When you select NetBIOS, device driver parameters
	cannot be set in LANAID. You can find up-to-date
	information about the NetBIOS device driver
	parameters in LNCLIENT.TXT in the \LNCLIENT
	subdirectory.
IEEE 802.2	Choose 802.2 when you are using the IEEE 802.2
	protocol on your LAN. When you select 802.2, driver
	parameters cannot be set in LANAID.
TCP/IP	This option is available under Windows or Windows for
	Workgroups only. Choose TCP/IP when you are using
	the TCP/IP protocol on your network.
	When you select TCP/IP, you are required to select a
	local IP address and default gateway. The local subnet
	mask is set to 255.255.240.0 by default.

8Enter the parameters for Install Options, Network Options and if appropriate, for TCP/IP or NetWare Client 32.

On the IBM LAN Client Configuration window, there are two or more folder tabs. The Install Options and NetWork Options folders always appear. The TCP/IP and NetWare Client 32 folders appear only when they are selected for in the IBM LAN Client IBM Installation window. Make sure that you enter all requested information.