![](/images/new-backgrounds/1306821/30682149x1.webp)
INSTALLING THE NETWORK
3 DRIVERS
This chapter describes how to install network LAN drivers other than IBM LAN Client. After installation, some network drivers must be configured using LANAID, an installation and diagnostic utility described in Chapter 5.
If you are installing the IBM LAN Client go directly to Chapter 5.
Consult the following lists to determine if LANAID is required to configure your network driver:
LANAID is not required to configure the following drivers:
■Windows 95
■Windows NT 3.51
■Windows NT 4.0
■OS/2 NDIS 2 device driver using LAPS
■OS/2 NDIS 2 device driver using MPTS
■OS/2 NDIS 2 device driver using other installation programs
■Warp Connect
■Warp Server
■Novell NetWare Client 32 for Windows 95
LANAID is required to configure the following drivers:
■IBM LAN Support Program/Native
■IBM LAN Client
■DOS Client 16 for Novell NetWare lower than 3.12
■DOS Client 16 for Novell NetWare 3.12 and 4.0