EN 13/ IF OPERATING ANOMALIES OCCUR
• THE INDICATOR LIGHTS
| Problem | Possible Causes | What to do ? |
|
|
|
|
| The salt light does not go out | - No salt or an insufficient quan- | - Refill the tank and wait for the |
|
| tity of salt in the tank to trigger | cycle to end. If you have soft |
|
| the float. | water that requires no salt, the |
|
|
| light is constantly lit. |
|
|
|
|
| The lights all light up one after | - Wrong programme. | - Cancel the current program- |
| the other |
| ming by holding down the Start |
|
|
| button for 3 seconds and then |
|
|
| |
| A light flashes and the | - Programme selector wrongly | - Reposition the selector on a |
| programme does not start | positioned (between two not- | programme. |
|
| ches) |
|
|
|
|
|
• RELATING TO PROGRAMMING, DISPLAY |
| ||
|
|
|
|
| Problem | Possible Causes | What to do ? |
|
|
|
|
| The cycle lasts too long | - lThe | - Use these programmes prefe- |
|
| mes last longer because the | rably at night when it is not so |
|
| agitation and drying times are | important how long the pro- |
|
| longer to compensate for the | gramme lasts or when it ends. |
|
| lower washing and drying tem- |
|
|
| peratures |
|
|
|
|
|
| The appliance trips the circuit | - Insufficient amperage to sup- | - Check the socket’s amperage |
| breaker | ply all the appliances being | (10A minimum) and the |
|
| operated simultaneously. | meter’s capacity. |
|
| - Internal fault in the appliance. | - Call a technician. |
|
|
|
|
| The appliance does not start | - No mains power to the socket. | - Check the socket and the fuse |
|
| - Tap closed. (Cf. table fault d01). | - Check the tap is open. |
|
|
| - Check the hose line is OK. |
|
| - Selection error or programme |
|
|
| lock. | - Cancel by holding down Start |
|
|
| for 3” and |
|
| - Start button pressed too long | - Just press Start briefly to start |
|
| (>2”). | |
|
|
| the programme. |
|
| - Appliance in Safety mode (anti- | - Call a technician. |
|
| leak).(Cf. table fault d07). | |
|
|
| |
|
|
|
|
25
