Loading the regenerating salt Fig | Samsung DMB58AHC/AND specification

EN 6/ LOADING THE REGENERATING SALT

•Loading the regenerating salt (Fig. 06)

Important :

Only use special dishwasher regener- ating salt. Do not use table salt or any type of cooking salt: this could damage your appliance’s water softener.

AUnscrew and remove the stopper on the salt tank.

BFill the tank with regenerating salt spe- cially designed for dishwashers.

CUse the funnel supplied with your dis- hwasher. The first time, top up with water up to the rim of the tank.

•Regenerating salt indicator :

This illuminates when salt must be added. After the tank has been filled with regenerat- ing salt, the indicator light may remain lit until the salt has dissolved sufficiently, usually after one cycle (of if the tank has not been filled completely; for example, when first putting the machine into service using the sample).

This can be deactivated as indicated in the Fig. 06 paragraph “For multi-purpose products” set-

ting table.

Important :

If the salt overflows when filling the tank, to avoid oxidization of the tub it is advisable to remove the salt crystals or to run a Soaking programme.

A

SEL

B

EAU

C

12

Image 12

Samsung DMB58AHC/AND, DM-B58AHC/XET manual Loading the regenerating salt Fig, Regenerating salt indicator

Contents

Dishwasher Page EN Contents Safety Instructions InstallationChildren’s safety Use Environmental Protection ECONOMICAL, Environmentally Friendly WashingEnsure that the water softener is correctly set see General Presentation of the Dishwasher Description plate After-Sales Ref Presentation of the Control Panel Water Hardness Detergents, rinsing liquid or an agent acting as the saltDetergents, rinsing liquid and an agent acting as the salt Hardness Table Test strip10F Soft For Traditional Products Traditional tabletsPowder or liquid in the distributor’s drawer Fig Advice For MULTI-PURPOSE Products OptionProceed to set the option, if necessary Loading multi-purpose tablets Regenerating salt indicator Loading the regenerating salt Fig Adjustment lever Rinsing product FigChecking the level of rinsing liquid Lower Basket Very important Upper Basket Cutlery Basket Cutlery basket slides to allow for modu- lable loading Total safety Anti-overflow systemAnti-leak system If an anomaly occurs Programmes Table Pre-wash Washing at 60C Rinse Hot rinse Drying By condenserWashing at 45C Rinse Hot rinse Drying By condenser Very short 30-minute Washing at 50C Rinse Hot rinse Drying By condenserCold pre-wash Delayed programme start Immediate programme start Cancelling a programme Setting the audible signal’OPTION SCS Systeme Controle Salissure B Stopping the appliance Cleaning the Waste Filters Proceed in reverse order, inserting filters C B and then a Periodically Prolonged stoppage Summary of the Faults Before Calling for ServiceTip Indicator Lights Relating to PROGRAMMING, Display Poor Washing Results Tener is set correctly. Adjust it Check the indicator lightProduct Setting Prioritizing Drying Dullness Product Setting prioritizing brilliance Poor Operation Poor Drying Results Intervention Work Original Parts Details common to all models Tests to Standard ENTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4