Hardness Table, Test strip, 10F, Soft | Samsung DM-B58AHC/XET

EN 4/ ACTIONS BEFORE FIRST USE

•MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETER- GENT: TRADITIONAL OR MULTI-PURPOSE

First of all, in one simple action, you can test the lime content in your water using the testing strip supplied with your dishwasher or you can contact your local water utility to find out how hard your water is.

—Turn on the tap and let the water run for a few minutes.

—Fill a glass with water.

—Take the testing strip out of its casing and immerse it for 3 seconds.

—Wait 1 minute, shake the strip and look at the colours to find out how hard your water is.

• HARDNESS TABLE

Test strip

Hardness

0-10°F

10-18°F

18-25°F

25-40°F

40-55°F

55-70°F

> 70°F

Water

Soft

Slightly hard

Slightly hard

Hard

Hard

Hard

Very hard

Water softe-

Essential if

Essential if

ning and use

Optional

using traditional

using traditional

Mandatory

Mandatory

Mandatory

Mandatory

of salt

products

products

Possible use of

traditional products ➊

➊or or + + R

or ➋ Multi-purpose

➋

Use only of

traditional products ➊

or or + + R

➊ Traditional products: P : Powder detergent or L : Liquid detergent or

single tablet

+S : Regenerating Salt + R : Rinsing product

➋Multi-purpose products: Multi-purpose tablets

9

Image 9

Samsung DM-B58AHC/XET, DMB58AHC/AND manual Hardness Table, Test strip, 10F, Soft, Optional

Contents

Dishwasher Page EN Contents Installation Safety InstructionsChildren’s safety Use Environmental Protection ECONOMICAL, Environmentally Friendly WashingEnsure that the water softener is correctly set see Description plate After-Sales Ref General Presentation of the Dishwasher Presentation of the Control Panel Water Hardness Detergents, rinsing liquid or an agent acting as the saltDetergents, rinsing liquid and an agent acting as the salt Test strip Hardness Table10F Soft For Traditional Products Traditional tabletsPowder or liquid in the distributor’s drawer Fig For MULTI-PURPOSE Products Option AdviceProceed to set the option, if necessary Loading multi-purpose tablets Loading the regenerating salt Fig Regenerating salt indicator Adjustment lever Rinsing product FigChecking the level of rinsing liquid Very important Lower Basket Upper Basket Cutlery basket slides to allow for modu- lable loading Cutlery Basket Anti-overflow system Total safetyAnti-leak system If an anomaly occurs Programmes Table Pre-wash Washing at 60C Rinse Hot rinse Drying By condenserWashing at 45C Rinse Hot rinse Drying By condenser Very short 30-minute Washing at 50C Rinse Hot rinse Drying By condenserCold pre-wash Immediate programme start Delayed programme start Setting the audible signal Cancelling a programme’OPTION SCS Systeme Controle Salissure B Stopping the appliance Proceed in reverse order, inserting filters C B and then a Cleaning the Waste Filters Prolonged stoppage Periodically Summary of the Faults Before Calling for ServiceTip Relating to PROGRAMMING, Display Indicator Lights Poor Washing Results Check the indicator light Tener is set correctly. Adjust itProduct Setting Prioritizing Drying Dullness Product Setting prioritizing brilliance Poor Drying Results Poor Operation Original Parts Intervention Work Details common to all models Tests to Standard ENTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4