EN 12/ CLEANING YOUR APPLIANCE
• CLEANING THE WASTE FILTERS
The filtration system consists of several elements:
A- The waste filter.
B- The large main filter. C - The micro filter.
The filters are located in the centre of the tub and must be washed regularly to obtain opti- mum washing results.
•Actions :
➀Before removing the filters, remove any waste on the large main filter B with a sponge so that the waste does not block the sprinkler arms. Orient the rotor as shown in
the drawing. (Fig. 14)
➁ Loosen the waste filter a quarter of a turn and then remove it A .
③Remove the main filter B .
④Remove the micro filter screen C .
⑤Carefully clean filters A , B and C
under running water. (Fig. 15)
➀
ABC
➁
A
③
B
④
C
Fig. 14
Reinstallation:
Proceed in reverse order, inserting filters C
and B and then A .
Important :
Remember to lock the waste filter in A place by pushing it in fully and turning it a quarter turn.
⑤
ABC
Fig. 15
22
