EN 5/ DETERGENT PRODUCTS AND SETTING THE WATER SOFTENER
• FOR MULTI-PURPOSE PRODUCTS: 
OPTION
• Your appliance can be specially set to use
Advice:
To provide better coverage of the wide range of
“Extra Dry” improves the drying results in the event of reduced performance from the
“Sparkling Clean” enables you to prioritise the sparkle of your crockery whatever the type of
• Proceed as follows to adjust the water softener on the control panel:
— Access setting mode by holding down the “Menu” button. |
|
— The screen displays “SEt” to indicate that you are in |
|
Setting mode. |
|
— To use |
|
or HI or H2 depending on the water hardness. |
|
To do this, keep on briefly pressing one or other of the | keys until you reach the desired |
setting. |
|
• Proceed to set the 
option, if necessary
(Light unlit) : deactivates the
- Sparkling Clean
— The setting is validated automatically after 10 seconds if the “Menu” button in not pressed again.
Testing strip
Hardness
products Function Deactivated
products Extra Dry
products Sparkling Clean
Important :
The
• Loading multi-purpose tablets
To make loading the detergent easier, the distributor is located on the front of the upper basket; it is compatible with all the products recommended for your dishwasher.
•Place the tablet in the external compartment (Fig 04 on previous page) or
or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05 on pre- vious page).
- Close the distributor.
11
