Power LED (Indicator light)
•When the projector is on, Power LED will blink. Press “Power” button to enter screen, Power LED remains lit continually.
Temp LED (Indicator light)
•When fan malfunctions, the screen will shows the message stating “fan error, system is forced to turn off!”. Temp LED remains lit continually.
•When the temperature is unusual, screen will shows the message stating “temperature error, system is forced to turn off!”. Temp LED blinks once every half of second.
Lamp LED (Indicator light)
•Lamp LED will turn on automatically when lamp is on. Lamp LED will turn off automatically when the lamp is off..
Power (On/Standby)
•Press to turn power off and on.
•Please refer to the “Starting and turning off the projector” section in Page 13.
Menu (OSD menu)
•Press this button to display the menu, press once again to close the menu.
•If no other action is taken after the menu is opened, it will disappear automatically after 20 sec.
Source (Signal source)
•Select the signal of Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video,
Auto/Enter (confirm/Sync)
•When using menu, this button is the Enter function.
•Under general condition, this button is the Sync function.
5
