Woods Equipment 2300003 manual Install Exhaust Relocation Kit, Exhaust Kit Installation

Install Exhaust Relocation Kit 1024092

ROPS Tractors only

1.Attach exhaust bracket (2) to the right loader mount using two carriage bolts (4) hardened flat washers (5), and hex nuts (6).

NOTE: Carriage bolts must be installed so that the heads are inside the loader mount.

2.Torque carriage bolts to 170 lbs-ft.

3.Attach new exhaust stack (1) to tractor muffler using hardware previously removed. Do not tighten at this time.

4.Slide exhaust clamp (3) around exhaust stack.

5.Position stack and clamp against exhaust bracket

(2)and secure using lock nuts provided with clamp.

6.Tighten exhaust stack hardware at muffler.

1.1024093 Exhaust stack

2.1023019 Exhaust bracket

3.72130 Exhaust clamp 3/8 x 2-1/2

4.5607 5/8 NC x 1-1/2 Carriage bolt

5.57817 5/8 Hardened flat washer

6.230 5/8 NC Hex nut

Figure 6. Exhaust Kit Installation

DP6

Figure 7. Exhaust Kit Installed

6 Mount Installation MAN0572 (Rev. 1/30/2009)