Installation | Woods Equipment BH6500 instruction

BACKHOE SUB-FRAME INSTALLATION

Safety is a primary concern in the design and
manufacture of our products. Unfortunately, our		WARNING
efforts to provide safe equipment can be wiped
out by an operator’s single careless act.	■ Only use #59757 Sub-Frame Mounting Kit for
In addition to the design and configuration of
	mounting Woods BH6500 backhoe on Ford/New
equipment, hazard control and accident preven-	Holland TC18, TC21 tractor models. Sub-Frame
tion are dependent upon the awareness, concern,	must be installed with either a Woods 1006 loader
judgement, and proper training of personnel	or New Holland 7106 loader. Any other use or mod-
involved in the operation, transport, maintenance	ification of this mounting kit may result in serious
and storage of equipment.	injury or death.
It has been said “The best safety device is an	ν Safety instructions are important! Read all
informed, careful operator.” We ask you to be that	attachment and power unit manuals; follow all
kind of operator.	safety rules and safety decal information. (Replace-
	ment manuals are available from dealer or, in the

	United States and Canada, call 1-800-319-6637.)
	Failure to follow instructions or safety rules can
	result in serious injury or death.

νThe sub-frame mount is designed to provide secure mounting and adequate operator clearance when properly installed. Check clearance dimen- sions shown in figure 1 to be sure you have installed sub-frame correctly. Follow all mounting instructions in this manual. Do not operate back- hoe unless there is adequate clearance. Failure to check and comply with these instructions may result in serious injury or death.

νThe only time the backhoe may be operated from a position other than the operator seat is dur- ing backhoe attachment and removal. Operator must

•Read Sub-Frame Mounting Kit Manual instructions on attaching and removing back- hoe and use extreme care

•Always stand between rear tire and backhoe stabilizer arms or along side of tractor to avoid being trapped should the boom swing control be accidentally activated.

νA minimum 25% of tractor and equipment weight must be on the tractor front wheels when attachments are in transport position. Without this weight, tractor could tip over, causing personal injury or death. The weight may be attained with a loader, front wheel weights, ballast in tires, or front tractor weights. Weigh the tractor and equipment. Do not estimate.

νKeep all persons away from operator control area while performing adjustments, service, or maintenance.

νBefore working on backhoe, extend boom and dipperstick and place bucket on ground. Make sure that all system pressure has been relieved by oper- ating controls before performing maintenance or service or before disconnecting any hydraulic lines.

νMake sure all hydraulic hoses, fittings, and valves are in good condition and not leaking before starting power unit or using equipment. Check and route hoses carefully to prevent damage. Hoses must not be twisted, bent sharply, kinked, frayed, pinched, or come into contact with any moving parts. Operate moveable components through full operational range to check clearances. Replace any damaged hoses immediately.

4 Installation

PN-59756 (Rev. 4/9/01)

BH6500 specifications

The Woods Equipment BH6500 is a robust and versatile hydraulic backhoe designed for a variety of construction and landscaping tasks. Renowned for its durability and performance, the BH6500 offers a blend of efficiency and flexibility, making it an excellent choice for contractors, landscapers, and homeowners alike.

One of the standout features of the Woods BH6500 is its impressive digging depth. With a maximum digging depth of approximately 7 feet, the backhoe is designed to tackle deep excavations, trenching, and utility installations. The ability to gain access to deeper areas enhances its functionality for both commercial and residential projects.

Powering the BH6500 is a series of advanced hydraulic technologies that ensure smooth and precise operation. The hydraulic system provides exceptional breakout force, enabling users to lift and move heavy materials with ease. This capability is essential for digging, lifting, and backfilling applications, allowing operators to complete tasks quickly and efficiently.

The BH6500 is equipped with a variety of bucket options, including standard buckets, ditching buckets, and specialized attachments. This versatility allows users to customize the backhoe based on their specific needs, whether it’s digging, lifting, or grading. The easy change-out of attachments further adds to its convenience, minimizing downtime during projects.

In terms of compatibility, the Woods BH6500 is designed to be used with a wide range of tractors, significantly enhancing its usability. This feature allows users to maximize the investment in their existing equipment while expanding their operational capabilities.

Comfort and safety are also prioritized in the design of the BH6500. The ergonomic control layout and operator-friendly features improve ease of use, allowing operators to focus on their tasks without unnecessary strain. Safety mechanisms are integrated to protect users during operation, ensuring peace of mind while working on demanding jobs.

Overall, the Woods Equipment BH6500 is characterized by its strength, versatility, and advanced technology. Whether you are engaged in landscaping, construction, or agricultural work, this hydraulic backhoe provides the necessary power and functionality to complete tasks efficiently, making it a reliable partner for any project. With its array of features, the BH6500 stands out as a valuable asset in the world of machinery and equipment.