Woods Equipment BH6500 manual SUB-FRAME & Backhoe to Tractor Cont’d, Connect Hydraulic System

Page 16

SUB-FRAME & BACKHOE TO TRACTOR Cont’d

Connect Hydraulic System

1.

Couple the backhoe hydraulic pump to the tractor

 

 

 

PTO.

 

 

 

2.

Insert the pump bracket over the tractor drawbar

 

 

 

to prevent pump rotation. Engage the pump PTO cou-

 

WARNING

 

 

 

pler pin firmly in the tractor PTO spline groove.

ν Keep hands and body away from pressurized

3.

Check all hydraulic fittings and lines to be sure

they are tight and free of kinks or twists.

lines. Use paper or cardboard, not hands or other

4.

Make sure backhoe PTO driven hydraulic system

body parts to check for leaks. Wear safety gog-

gles. Hydraulic fluid under pressure can easily

is full (approximately 5-7 US gallons). Check the trac-

penetrate skin and will cause serious injury or

tor hydraulic reservoir and service if necessary.

death.

5.

Be sure the backhoe controls are centered in the

ν Make sure that all operating and service per-

neutral position and the backhoe hydraulic pump is

sonnel know that if hydraulic fluid penetrates

securely mounted to the tractor.

skin, it must be surgically removed as soon as

6.

With the tractor PTO and transmission in neutral,

possible by a doctor familiar with this form of

start the engine and run at low idle.

injury or gangrene, serious injury, or death will

7.

Smoothly engage the PTO pump to provide back-

result. CONTACT A PHYSICIAN IMMEDIATELY IF

hoe hydraulics.

FLUID ENTERS SKIN OR EYES. DO NOT DELAY.

 

 

ν Make sure all hydraulic hoses, fittings, and

NOTE: Very little engine power is required to operate

valves are in good condition and not leaking

the hydraulic system in this mode. Should the engine

before starting power unit or using equipment.

pull down excessively, check the plumbing hook-up

Check and route hoses carefully to prevent dam-

for reversed lines or a control lever stuck in an operat-

age. Hoses must not be twisted, bent sharply,

ing position.

kinked, frayed, pinched, or come into contact with

 

 

any moving parts. Operate moveable components

 

 

through full operational range to check clear-

 

 

ances. Replace any damaged hoses immediately.

 

 

 

 

 

 

 

14 Installation

PN-59756 (Rev. 4/9/01)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 59756 Model #59757 Sub-Frame Mounting Kit Date of Purchase To the DealerTable of Contents Safety Rules InstallationTraining PreparationMaintenance OperationInstallation Backhoe SUB-FRAME InstallationSUB-FRAME Installation Cont’d Tractor PreparationInstall Rear Hanger Brackets Rear Hanger Bracket AssemblyInstall Mid-mount Bracket Modify Loader MountsInstall Right & Left Reinforcement Brackets For tractors equipped with Woods 1006 LoaderInstall Crossmember Crossmember Bracket InstallationSub-Frame Fit-Up Sub-frame Fit-up typicalAttaching Sub-Frame to Backhoe Sub-frame attached to backhoePump Bracket Assembly Typical Mount Bracket to Pump KitSUB-FRAME & Backhoe to Tractor Mount Sub-Frame & Backhoe to TractorSUB-FRAME & Backhoe to Tractor Cont’d Connect Hydraulic SystemRemove Backhoe With Sub-Frame Store Hydraulic PumpParts #59757 SUB-FRAME Mounting KIT#59757 SUB-FRAME Mounting KIT Parts List Part QTY DescriptionBolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsWarranty Model No Part Warranted Duration Woods Equipment Company. All rights reserved

BH6500 specifications

The Woods Equipment BH6500 is a robust and versatile hydraulic backhoe designed for a variety of construction and landscaping tasks. Renowned for its durability and performance, the BH6500 offers a blend of efficiency and flexibility, making it an excellent choice for contractors, landscapers, and homeowners alike.

One of the standout features of the Woods BH6500 is its impressive digging depth. With a maximum digging depth of approximately 7 feet, the backhoe is designed to tackle deep excavations, trenching, and utility installations. The ability to gain access to deeper areas enhances its functionality for both commercial and residential projects.

Powering the BH6500 is a series of advanced hydraulic technologies that ensure smooth and precise operation. The hydraulic system provides exceptional breakout force, enabling users to lift and move heavy materials with ease. This capability is essential for digging, lifting, and backfilling applications, allowing operators to complete tasks quickly and efficiently.

The BH6500 is equipped with a variety of bucket options, including standard buckets, ditching buckets, and specialized attachments. This versatility allows users to customize the backhoe based on their specific needs, whether it’s digging, lifting, or grading. The easy change-out of attachments further adds to its convenience, minimizing downtime during projects.

In terms of compatibility, the Woods BH6500 is designed to be used with a wide range of tractors, significantly enhancing its usability. This feature allows users to maximize the investment in their existing equipment while expanding their operational capabilities.

Comfort and safety are also prioritized in the design of the BH6500. The ergonomic control layout and operator-friendly features improve ease of use, allowing operators to focus on their tasks without unnecessary strain. Safety mechanisms are integrated to protect users during operation, ensuring peace of mind while working on demanding jobs.

Overall, the Woods Equipment BH6500 is characterized by its strength, versatility, and advanced technology. Whether you are engaged in landscaping, construction, or agricultural work, this hydraulic backhoe provides the necessary power and functionality to complete tasks efficiently, making it a reliable partner for any project. With its array of features, the BH6500 stands out as a valuable asset in the world of machinery and equipment.
Top Page Image Contents