Xantech MRKP1E installation instructions Safety Information, Xantech Limited Warranty

Page 2

Safety Information

Read Information — All the safety and operating information should be read before the appliance is operated.

Follow Information — All operating and use information should be foll owed.

Retain Information — The safety and operating information should be r etained for future reference.

Heed Warnings — All warnings on the appliance and in the operati ng instructions should be heeded.

Wall Mounting — Mounting of this appliance should be done only b y an authorized installer.

Non-Use Periods — Appliances that are left unattended and unused f or long periods of time should be de-energized.

Water — Do not use the apparatus near water.

Cleaning — Unplug the apparatus from the power outlet befor e cleaning. Use only a dry cloth to clean the apparatus.

Object and Liquid Entry — Never insert objects of any kind through the ope nings of these appliances, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Care should be taken so that objects do not fall and liquids are not spilled into the appliance through openings in the enclosure.

Servicing — Do not attempt to service these appliances yours elf, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Damage Requiring Service — These appliances should be serviced by qualified service personnel when:

￿A power supply connection or a plug has been damaged or

￿If liquid has been spilled into the appliance or objects have fallen into the appliance or

￿The appliance has been exposed to water or moisture or

￿The appliance does not appear to operate normally or exhibits a marked change in performance or

￿The appliance has been dropped or the enclosure damaged.

Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. The Master Control Unit battery should be replaced only after turning the power off and only by an authorized installer.

1

Xantech Limited Warranty

Xantech Corporation (“Xantech”) warrants this product to be free defects in materials and workmanship for a period of two years from the date of documented purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual coast of the installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

Xantech and Universal Dragon™ are trademarks of Xan tech Corporation

Legrand® is a registered trademark of the Legrand Group.

All other trademarks are the properties of their registered owners.

Xantech Corporation

13100 Telfair Avenue, Sylmar CA 91342 Xantech.com

Installation Instructions, MRKP1E © 2009 Xantech Corporation

Document #08905249C

This document is copyright protected. No part of this manual may be copied or

reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

22

Image 2
Contents Installation Instructions Safety Information Xantech Limited WarrantyPrecautions Caring For the MRKP1E Clean only with a dry soft clothOperating Temperatures & Environments Specifications Extending external IR receiver connection with 3-wire cableTroubleshooting IntroductionDefining Terms Zone Local Source / SourcePlanning Retro-Fit Wiring/ Post ConstructionSystem Design Overview/Applications Pre-ConstructionInst Setup Parameters Pre-Wiring CAT-5 Wiring between MRC88m and MRKP1EUser Setup Parameters Description MRKP1E Main Setup MenuMRKP1E Front Panel External IR Receiver Connections MRKP1E Rear ConnectorsItem Description Compatible Handheld remotes InstallationInternal IR Receiver Connections MRKP1E to MRC88m and Expansion Keypads