Xantech HDMI4X4 user manual Introduction

Page 2

INTRODUCTION

Thank you for purchasing the 4x4 HDMI Matrix.

The 4x4 HDMI Matrix switches four HDTV sources to any four HDMI displays.

The 4x4 HDMI Matrix switcher has four HDMI inputs and four HDMI outputs. Matrix input #1 and the HDMI port of HDTV source #1 connects using a male to male HDMI cable. The HDMI port of HDTV source #2 connects to HDMI input #2. The HDMI port of HDTV source #3 connects to HDMI input #3. The HDMI port of HDTV source #4 connects to HDMI input #4. There are four (4) HDMI outputs connecting to four (4) different displays.

Note: The switching is done by using either the RMT-16-IR remote control or through the RS232 port. The 4x4 HDMI Matrix is rack mountable. Any HDTV with DVI inputs can be connected to the HDMI outputs of the matrix by using a DVI to HDMI adapter if the cable used is DVI.

Allows any HDMI display to view any source at any time

Allows any source to be displayed on multiple displays at the same time

Maintains resolutions up to 1080p, 2k, and 1920x1200

Maintains highest HDMI single link video resolution

Maintains highest HDMI digital audio signal

Supports HDCP compliant devices

HDMI or DVI to HDMI cables are used to connect the inputs and the matrix output

Each display's inputs can be switched with the IR remote control or through RS232

The HDMI4X4 consists of:

(1) 4x4 HDMI Matrix

(4)HDMI 6 Cables (M-M)

(1)24VDC Power Supply

(1)User Manual

(1)RMT-16IR Remote Control

(1)Rack Ears

- 2 -

Image 2
Contents HDMI4X4 Introduction Read These Notes Before Installing or Operating the HDMI4X4 RMT16-IR InstallationDIP Switch Guidelines IR Codes Ascii RMT16-IR4X4 Hdmi Matrix Rack Mount Diagram Technology Terminiation DDCSpecifications Technical Support Mailing Address
Related manuals
Manual 2 pages 11.41 Kb Manual 14 pages 27.2 Kb