Humax LGB-26TPVR manual Setting the PIP/TWIN, Pip/Twin

Setting the PIP/TWIN

PIP/TWIN

With PIP, Picture in Picture, you can call up a small screen within the main screen. This enables you to watch two different input sources at the same time. In this way, you can watch TV programme or monitor the video input from any connected devices while watching TV or other video input.

1.Press the MENU button.

2.	Select Picture using the ̵/̷Gbutton, and press the OK or Gbutton.
3. Select PIP/TWIN using the ̵/̷ button, and press the OK or				Gbutton.
4.	Select Main Input using the ̵/̷ button, and press the		or	button to
	select a particular thing.
	Digital TV : Analog TV : AV1 : AV2 : AV3 : AV4 : S-Video : Component : PC : DVI
5.	Select PIP/TWIN using the ̵/̷ button, and press the		Gor	button to
	select a particular thing.
	_ Off	: Switch PIP mode off.

_ PIP (Picture in Picture) : Switch PIP mode on.

_TWIN 1, TWIN 2 : Switch two Twin screen modes on. (Twin screen 1, Twin screen 2)

6. Select PIP/TWIN Input using the ̵/̷ button, and press the or button to select a particular thing.

Digital TV : Analog TV : AV1 : AV2 : AV3 : AV4 : S-Video : Component : PC : DVI

Note : You can only select different inputs between Main Input and

PIP/TWIN Input except Digital TV mode.

You can enjoy two digital channels simultaneously in each screen.

7. Select PIP Position using the ̵/̷ button, and press the Gor button to move the PIP picture to another corner of the screen.

Left-Top Right-Top

Left-Bottom Right-Bottom

Note : If you wish to select PIP Position, you must set the PIP/TWIN mode to PIP.

24. Setting the PIP/TWIN