Installation
Automatic Search
If your
1.Press the DTV SETUP button.
2. Select Installation using the GGGG̵/̷ button, and press the
OK or button.
3.Select Automatic Search from Installation menu using the
GGGG̵/̷ button, and press the
OK or button.
Search
Please wait while the
1.During the automatic search procedure, the cursor is located at Stop. If you press the OK button during the search, the operation is stopped and the channels found thus far will be displayed.
2.If despite successful completion of search operation the some or all channels have been not found, press the OK button and perform to reset the search operation again if necessary.
3.You can delete unnecessary channels from the found channels. Select your desired channels to delete and press the OK button. Then select Delete and press the OK button.
To delete all channels, select Select All to select all channels, select Delete, and press the OK button.
4.When completing Channel Search and deleting unnecessary channels, select Save to save the changes.