Gefen GTV-WHD-1080P-SR manual Panel Descriptions, Sender Unit, Receiver Unit

Page 12

PANEL DESCRIPTIONS

Sender Unit

1Video

This LED indicator will glow bright blue once a video link is established between the Sender unit and the Receiver unit.

2Pairing button

Press and hold this button for 3 seconds to pair the Sender unit with the Receiver unit.

3Link

This LED indicator will glow bright blue once a link is established between the Sender unit and the Receiver unit.

4USB

Connect the included USB to Mini-USB cable from the computer to this Mini-B port.

5HDMI Connector

Connect the Sender unit to a Hi-Def source using this HDMI connector.

Receiver Unit

1Pairing button

Press and hold this recessed button using a paper clip for approximately 3 seconds to pair the Sender unit with the Receiver unit.

2IR Sensor

Receives IR commands from the included IR Remote Control unit and the IR remote of the source unit to be controlled.

3Link

This LED indicator will glow bright blue once a link is established between the Receiver unit and the Sender unit.

4Video

This LED indicator will glow bright blue once a video link is established between the Receiver unit and the Sender unit.

5USB

Mini-USB service port (for factory use only).

6HDMI Out

Connect the included HDMI cable from this connector to an HD display.

7Power

Connect the included 5V DC power supply to this receptacle.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Wireless for Hdmi Page Wireless for Hdmi In-Room Solution Asking for AssistanceTechnical Support Technical Support HoursContents About Gefen GefenTV Wireless for Hdmi In-Room Solution IntroductionFCC Statement Instruction to the UserOperation Notes Operation Notes Features Hdmi Features SupportedFeatures Package IncludesPanel Layout Receiver unit Front Back Panel Descriptions Sender UnitReceiver Unit IR Remote Control Unit Layout and DescriptionsConnecting the Wireless for Hdmi How to Connect the Wireless for Hdmi In-Room SolutionWiring Diagram for the Wireless for Hdmi In-Room Solution Operating the Wireless for Hdmi Linking ProcessUsing Multiple Sender Units Adding a new Video SourcePress the OK button to continue adding the Sender unit Adding Sender Renaming Sources Available characters for source naming Select Video Source Sender Switching between Sources STB Deleting Sources After a few seconds, the screen will go blank DVR Connecting to... status message will be displayed Disconnecting the Wireless Link Reconnecting the Wireless Link Power-Down Mode Powering-Up after a Power-Down Specifications Warranty Product RegistrationPage Page Rev A5 Nordhoff St., Chatsworth CA
Top Page Image Contents