Gefen GTV-WHD-1080P-SR manual Operation Notes

Page 7

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE GEFENTV WIRELESS FOR HDMI - IN-ROOM SOLUTION

Maximum extension distance is 80 feet (25 meters) with a clear line-of-sight.

Supported resolutions:

»» 1080p60, 1080p50, 1080p24, 1080i60, 1080i50, 720p60, 720p50, 576p50, 576i50, 480p60, 480i60

»» VESA: 1600x1200, 1366x768, 1280x1024, 1024x768, 800x600,

640x480)

Obstructions such as walls and furniture may reduce performance and reception distance.

DVI-D Support

Gefen recommends placing both units into the provided stands, with the Gefen logo pointing down, to help maintain the strongest possible transmission signal.

Interference caused by other RF products may reduce performance and reception distance.

Use with multiple Sender units:

»» Can be used with a single Receiver unit to provide source-switching capability.

»» Up to 8 Senders are supported. Local RF interference can limit the number of Sender units that can be used. Each Sender unit needs to be placed at least 1 meter apart for optimum performance.

»» US Models: Up to 4 pairs of Sender and Receiver units can be operated in the same environment. Local RF interference can limit the number of units that can be used. Each Sender unit needs to be placed at least 1 meter apart for optimum performance. If additional Sender / Receiver pairs are to be used, each set of units must be placed beyond the reception range (80 feet / 25 meters) of the other in order to prevent interference.

Continued on next page

3

Image 7
Contents Wireless for Hdmi Page Technical Support Hours Wireless for Hdmi In-Room SolutionAsking for Assistance Technical SupportContents Introduction About Gefen GefenTV Wireless for Hdmi In-Room SolutionInstruction to the User FCC StatementOperation Notes Operation Notes Package Includes FeaturesHdmi Features Supported FeaturesPanel Layout Receiver unit Front Back Sender Unit Panel DescriptionsReceiver Unit Layout and Descriptions IR Remote Control UnitHow to Connect the Wireless for Hdmi In-Room Solution Connecting the Wireless for HdmiWiring Diagram for the Wireless for Hdmi In-Room Solution Linking Process Operating the Wireless for HdmiAdding a new Video Source Using Multiple Sender UnitsPress the OK button to continue adding the Sender unit Adding Sender Renaming Sources Available characters for source naming Select Video Source Sender Switching between Sources STB Deleting Sources After a few seconds, the screen will go blank DVR Connecting to... status message will be displayed Disconnecting the Wireless Link Reconnecting the Wireless Link Power-Down Mode Powering-Up after a Power-Down Specifications Product Registration WarrantyPage Page Rev A5 Nordhoff St., Chatsworth CA