Belkin AV4 user manual Setting the Product Up Set Up the ScreenCast AV Transmitter, Figure a

Page 11

Setting the Product Up

Set Up the ScreenCast AV Transmitter

A..

hdmi

Figure A

Connect your ScreenCast AV transmitter to the included power supply and plug the power supply into an available power outlet. Press the power button to turn it on.

Connect your HDMI AV source devices to the ScreenCast AV receiver ports. Make sure all of your video sources are plugged into power and are turned on.

Connect the IR emitter to the ScreenCast AV transmitter via the 3.5mm connection (it’s similar to a headphone jack). The four ends of the emitter will relay commands from those devices’ remotes (from ScreenCast receiver to transmitter to emitter to your devices).

B..

Figure B

Connect the cable labeled “IR emitter” to the back of the transmitter. Then route the four ends to the front of your video sources.

These will relay remote control commands from the ScreenCast receiver. You will complete the setup of these in the section “Setting Up the IR Emitters,” after the section on the receiver.

9

Image 11

Contents F7D4515 8820-00863 Rev. A01 Table Of Contents Getting Started Introduction What’s in the Box? Getting StartedDefgh ScreenCast AV 4 TransmitterAB C ScreenCast AV 4 ReceiverYour Audio/Video Source Components General Information Your HdtvScreenCast AV Receiver General InformationGeneral Info on Range IR Infrared, or Most Normal AV and TV Remotes ScreenCast AV TransmitterHDMI-CEC Figure a Setting the Product Up Set Up the ScreenCast AV TransmitterSet Up the ScreenCast AV Receiver Setting the Product UpName Your Video Sources Setting Up the IR EmittersSet Your TV’s Input to Hdmi Use Your ScreenCast AV Remote to Select LanguagesDaily Use with Your ScreenCast Remote and On-Screen Display Switching Video SourcesNaming/Renaming Video Sources ScreenCast AV SettingsRenaming One Video Source ScreenCast AV SettingsRenaming All Video Sources Naming/Renaming Transmitters Adding a Transmitter Adding/Deleting a TransmitterScreenCast AV Settings Deleting a Transmitter Turning Wireless On/Off Setting/Changing the Language Connectivity Video and Audio Troubleshooting and FAQsDistance and Placement My remote commands don’t seem to workOther Tech Info Modifications Other Information FCC StatementFederal Communications Commission Notice FCC CautionOther Information How state law relates to the warranty Technical Support