Aurora Multimedia ICS-SP20 manual Keys, Key ID OFF, Key Chroma, Key ON/STBY, Menu Structure

Page 8

ICS-SP20 User Manual

Keys: 0-9

Dialog: “SWITCH TO” – enter new channel number, several digits can be entered if necessary. Channel is switched to after a 3 seconds timeout (since the most recent digit is entered) or after pressing TV/Video/FM or R key.

Key: “ID OFF”

Enter the main configuration menu. See the Menu System chapter

Key: “Chroma”

Enter selections for the menu.

Key: “ON/STBY”

Switch ICS-SP20 power on/off. The display panel is switched accordingly if it is connected using the RS- 232 port or IR output port.

7.2Menu Structure

The menu system allows a user to control various aspects of ICS-SP20 configuration.

For all menus, up/down arrows move the cursor (yellow “selection” highlight) up/down. Central key selects the current submenu/option and finishes text entry (passwords, channel labels, etc.). Left/right arrow changes the currently active option, if possible.

When in “text edit” dialog (e.g., channel label editing), left/right arrows move the cursor left/right, up/down arrows change the character at the cursor.

The main menu:

This menu allows a user to select the desired sub-menu for further configuration or to set default settings. “Set default settings”.

These sub-menus are discussed in more detail in the subsequent chapters.

7

Image 8
Contents ICS-SP20 for Sony Table of Content Introduction Supported IR transmitters and basic key functionsSony Display Settings Quick Start GuideLED functions A/V & Control connectors RF connectorRJ11 Service Port connector ConnectionsRemote Control Functions Key Volume+/- VOLOperating the ICS-SP20 Key Contrast +/- CHKeys Key ID OFFKey Chroma Key ON/STBYGeneral Settings Video SettingsAudio Settings Tuner SettingsVolume Spatial EffectPanel Settings ModelCC Settings Chip SettingsTroubleshooting Symptom ChecksSpecifications Applicable signalsDimensions WeightLimited Warranty FCC Part 15 Statement