Aurora Multimedia ICS-SP20 manual General Settings, Video Settings

Page 9

ICS-SP20 User Manual

7.3General Settings

This menu allows control of various “general” aspects of ICS-SP20 behavior. Note that the *-marked options are accessible only in Service mode, and not in Stand-alone mode.

A/V Input – Allows user to select the audio/video input source (among the built-in Tuner and available AV-inputs)

Current time – Allows to set the current time Sleep timer – Allows user to set the sleep timer

7.4Video Settings

Brightness

-- Controls the brightness of the picture.

Contrast

-- Controls the contrast of the picture.

Color

-- Controls color saturation (0 corresponds to grayscale picture)

Startup Logo

-- Enabled or disables “logo” picture display after ICS-SP20 powering on.

Timer Logo

-- Time, in seconds, for which the “logo” picture is shown after ICS-SP20

Video Position

powering on.

-- Opens the “Video position” submenu, allowing control of picture position on

 

screen.

8

Image 9
Contents ICS-SP20 for Sony Table of Content Supported IR transmitters and basic key functions IntroductionQuick Start Guide Sony Display SettingsLED functions RF connector A/V & Control connectorsRJ11 Service Port connector ConnectionsKey Volume+/- VOL Remote Control FunctionsOperating the ICS-SP20 Key Contrast +/- CHKey ID OFF KeysKey Chroma Key ON/STBYVideo Settings General SettingsTuner Settings Audio SettingsVolume Spatial EffectModel Panel SettingsChip Settings CC SettingsSymptom Checks TroubleshootingApplicable signals SpecificationsDimensions WeightFCC Part 15 Statement Limited Warranty