Technicolor - Thomson DTH 6000 manual Sound control, Sound selection in playback mode

Page 19

Use

Sound control

Sound selection in playback mode

VCR

1	Load a tape and press PLAY.	EN
2	Call the OVERVIEW menu using the MENU key and select the Sound mode line using	EN

3	the ▼ key.
3	Confirm with OK.
4	The SOUND MODE menu appears.
	Using the C or B key, select the sound tracks.
	Using the C or B key, select the sound tracks.
	- Stereo: stereo sound of the Hi-Fi tracks,
	- Mono: mono sound of the linear track,
	- Track 1: sound of the left track
	- Track 1: sound of the left track		Sound mode	BStereo
			Sound mode	BStereo

-Track 2: sound of the right track,

-Mix: sound of the mixed Hi-Fi and mono tracks.

VCR

If the tape was recorded in Dolby Surround or Dolby Pro Logic Surround, connection of a special

audio/video amplifier will allow you to reproduce these sound effects.

“DOLBY”, “Prologic” and the double-D symbol Laboratories Licensing Corporation.

are trademarks of DOLBY

Setting the type of sound to be recorded

The broadcast sound types are different from channel to channel. Your video recorder uses 3 tracks to record the sound:

-two HiFi tracks for stereo or bilingual sound (track 1 and 2),

-one normal track for mono sound or track 1 for a bilingual telecast.

Depending on the actual sound type of the TV channel (stereo, NICAM or mono), the video recorder will distribute the sound on these different tracks.

1Load a tape and press REC.

2Display the OVERVIEW menu using the MENU key, then select the Sound mode line with ▼.

3Confirm with OK.

		The SOUND MODE menu comes up.
	4		Sound mode	B Mono
		Select the Stereo, Mono, Track 1 or Track 2.

VCR

19

Image 19

Contents Contents Precautions and guarantee Box contents Basic connection ConnectionsOther connection possibilities Audio/video amplifier Other devicesPlayer, another video recorder, etc. AV2 socket Camcorder AV3 socketGeneral functions Remote controlStart recording Select a channel Access the contents menu of the discHifi Stereo Nicam Front panel controlsFront panel display Store the channel and its number on the television set Initial InstallationModulator Automatic channel searchSorting the channels Clock settingNumber with 0 to 9 keys New or encoded channelDVD Menus Disc content menusMenus VCR menusPlaying a tape Recording with automatic stop instant record RecordingGetting prepared Simple recordingProgramming a recording VCR Programming using a PlusCode numberVideo PLUS+ system and satellite demodulator But select the AV1 or AV2 socket Error messages likely to occur when programmingWithout the PlusCode programming numbers To check your programmingDeleting a programmed recording Delete the programmed recordings using the 0000 keyRecording programmed on a connected set Load a tape and press Play Sound selection in playback modeSetting the type of sound to be recorded Sound controlVideo PLus+ + 10 minutes Eco modePreferences Auto clockIndex search Tracking and stability in play modeBy default Cassette type Shown on Other functionsVariable slow motion DVD and video CD PlaySimple play Still image Frame advance DVD and video CDStandard Play all discs Play modesLock TV Image DisplayOn-Screen Displays Digital Output Select the Sound option in the main menu using the PlaySound Sound LogicAudio LanguagesPlayer Menus Disc MenusMarkers DVD and audio CD Direct accessInfo Menus Repeat playback all discsAudio channel video CD Audio DVDSubtitles DVD Camera angles DVDSkipping songs What is MP3?Reading MP3 files Playing an MP3 CDDVD-Video Discs you can playProblem Solution TroubleshootingHandling and care for discs Technical dataRemote control Concerning video tapes