Technicolor - Thomson DTH 6000 manual New or encoded channel, Number with 0 to 9 keys

Set-up

New or encoded channel

To complete the set-up of your video recorder when the automatic channel set-up has not stored all of the channels or when you wish to store a new channel.

1Press the VCR key on your remote control.

2Using the MENU key call up the OVERVIEW menu.

3The Installation line is already selected, press OK.

4Using the ▼ key, select the Manual set up line and confirm with OK.

5Select the Reception line with ▼ and choose CH (for

the channels received via your roof aerial) or CC (for
	Reception	CH
the cable network channels) using C or B.	Autosearch	CH53
6 Press ▼ to select the Autosearch line.	< / >	___l___
	Store on PR	03
	Decoder

7Press C or B several times to search for the channel of a programme (you may also directly enter a

number with 0 to 9 keys).

VCR

When a channel is found, the pictures come up on the screen.

8When the picture is poor, try the Fine tuning (</>) using ▼, and then C or B.

9If the channel is encoded (and you have a decoder connected to socket AV2), set the cursor on Decoder using the ▼ key, and check the box using the OK key.

10Position the cursor on Store on PR and assign a channel number using the number keys 0 to 9 (example: 0, 1 for Pr1).

11Press OK to store this number.

12If you wish to continue with TV channel set-up, repeat the steps 7 to 11. Otherwise press EXIT.

12