Sony DVP-S725D operating instructions Welcome, Precautions Safety, Installing

Page 2

WARNING

Welcome!

To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Mains cord must only be changed at qualified service shop.

Precautions

Safety

•This unit operates on 220 - 240 V AC, 50/60 Hz. Check that the unit's operating voltage is identical with your local power supply.

•If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

•The unit is not disconnected from the mains as long as it is connected to the mains outlet, even if the unit itself has been turned off.

•Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.

Installing

•Allow adequate air circulation to prevent internal heat buildup.

•Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

•Do not install the unit near heat sources such as radiators or air dusts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

•Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

•Keep the unit and discs away from equipment with strong magnets, such as microwave ovens or large loudspeakers.

•Do not place heavy objects on the unit.

•If the unit is brought directly from a cold to a warm location, moisture may condense inside the CD/DVD player and cause damage to the lenses. When you first install the unit, or when you move it from a cold to a warm location, wait for about one hour before operating the unit.

Thank you for purchasing the Sony CD/ DVD Player. Before operating the unit, please read this manual thoroughly and retain it for future reference.

2

Image 2

Contents CD/DVD Player Welcome Precautions SafetyInstalling Table of Contents About This Manual This Player Can Play the Following DiscsTrack Terms for discs TitleChapter StructurePrecautions Getting Started UnpackingInserting batteries into the remote TV Hookups Required cordsTo connect the player to a nor mal TV Setups for the playerTo connect the player to a wide-scr een TV DirectlyReceiver Amplifier Hookups With a digital When you play a DVD that is recorded in DTS formatWhen you play a DVD that is recorded in Mpeg format DAT deck, etcAmplifier with 5.1 ch inputs Speaker placementChannel Surround Hookups Set each speaker position or distance, etc. SeeRear speaker R Center speakerFront speaker Press SET UP Select Français usingTo cancel using the setup display on the way Select OSD using /., then pr ess /or EnterPlaying Discs Playing Discs You can turn on the player using the remoteU Power OperationTo change the playback speed Shuttle Mode Playing at Various Speeds/Frame by FramePress á Turn the click shuttleWhile playing a disc, press pto stop playback To play from the beginning of the discPress Title Using the Menu for EachUsing the title menu Press ?//.//to select the title you want to playPress DVD Menu Using the DVD Menu Using the DVD menuPlaying Video CDs with PBC Functions PBC Playback Press ?//.//to select the item you want to changeGoing back to the menu screen Using the Front Panel DisplayWhen playing back a DVD Display information while playing the discDisplay information while playing a disc Using the Front Panel DisplayWhen playing back a CD/VIDEO CD Using Various Functions with the Control Menu Using Various Functions with the Control MenuUsing the Control Menu Display Control Menu Item List Searching for the Title/ Chapter/Track/Index/Scene Control Menu Item ListWhen playing a Video CD during PBC playback pTIME/MEMO To cancel selectingWhen playing a DVD PTIME/TEXT or TIME/MEMO Checking the Playing Time and Remaining TimeCurrent chapter when playing a DVD Selecting a Start Point Using the Time CodeTo cancel inputting Select CSelect Disc Memo Input / in TIME/TEXT or TIME/MEMO Checking the Information of the DiscLabeling discs Disc Memo Disc Memo Input display appearsTo correct the characters Checking the Information of the DiscDisc label is stored Text or DiscDisplaying the audio information Disc PAUDIO When playing a DVDChanging the Sounds Z PSUBTITLE Displaying the SubtitlesChanging the Sounds Press Changing the Angles ZSelectANGLE Angle is changed to the selected angleSetting for Digital Cinema Sound Z Effects of each itemEnhanced Surround Side RearCreating Your Own Program Program Play Creating the programTo cancel programming PWhen playing a Video CD or CDPress áto star t Program Play To cancel Program Play To cancel the programmed orderTo cancel Shuffle Play Using VariousWhen playing a DVD and when Program Play is set to OFF Playing in Random Order Shuffle PlayPlaying Repeatedly Repeat Play Repeating a Specific Portion A÷B RepeatSelect SET / in A-B Repea T A÷B Repeat setting display appearsTo cancel A÷B Repeat Play Starting point point a is setDisplays of each item PADVANCED When playing a DVDChecking the Play Information Z Appears when the DVD has dual layers Checking the Play InformationYou can adjust the following picture items individually Adjustments for Playback Picture Video EQ Video Equalizer ZTo adjust the picture items PDNRSelect Memor Y/ in Video EQ Adjustments for Playback Picture Video EQControl Select the pictur e item you want to adjust using Video control display appearsDisplaying Different Angles Simultaneously Z To cancel displaying multi-anglesTo cancel watching the strobe play Dividing a Track into 9 Sections Strobe PlayScanning the Title, Chapter and Track Z Setting and Selecting Favorite Scene BookmarkSetting the bookmark Settings and Adjustments Using the Setup Display ZPress SET UP to display the setup display on the TV screen Select the setting you want using ?//.//, then press Enter Using the Setup DisplaySelect the item you want using /., then press / or Enter Press SET UP on the remoteSetup Display Item List Default settings are underlinedPDVD Menu Setting the Language for Display and SoundPOSD On-Screen Display PAUDIOPSCREEN Saver Settings for Display Screen Setup ZPTV Type PBACKGROUNDPDIMMER Picture is stored in memoryPAUTO Play Limiting Playback by Children Parental Control Custom Settings Custom Setup If you have forgot your password Standard Code numberAudiofilter Settings for Sound Audio SetupAUDIOATTattenuation AUDIODRCDynamicRangeControlPDIGITAL OUT Setting for the Signal to the Digital OutputPDOWNMIX PDOLBY DigitalPDTS Settings for Sound Audio SetupPMPEG Selects the size of the speakers to be connected Speaker Set UpPSIZE PDISTANCESetting for Speakers Speaker Setup Adjusting the speaker volumeControlling TVs with the remote AdjustmentsSwitch Number Buttons Manufacturer Code NumberBy pressing You can SwitchControlling an AV receiver amplifier With the remote Code numbers of controllable receivers amplifiersPicture TroubleshootingPower Operation TroubleshootingSound Angles cannot be changed when you play a DVD Player does not play from the beginning when playing a discSubtitles cannot be turned off when you play DVD Player starts playing the DVD automaticallySelf-diagnosis function First three characters Cause and/or Corrective ActionSpecifications Glossary Video CD Language Code List Code LanguageIndex to Parts and Controls Front PanelIndex to Parts and Controls Rear Panel Remote Index