![](/images/new-backgrounds/1278479/278479119x1.webp)
Settings and Adjustments
Setting for Speakers (SPEAKER SETUP)
pBALANCE
You can vary the balance of each speaker as follows. Default adjustments are in the parentheses.
•FRONT (0dB)
Adjust the balance between the front left and right speakers
•REAR (0dB)
Adjust the balance between the rear left and right speakers
pLEVEL
You can vary the level of each speaker as follows. Default adjustments are in the parentheses.
•CENTER (0dB)
Adjust the level of the center speaker
•REAR (0dB)
Adjust the level of the rear speakers
•SUBWOOFER (0dB)
Adjust the level of the subwoofer
pTEST TONE
You can hear the test tone from each speaker in sequence.
•OFF: The test tone is not emitted from speakers.
•ON: During adjustment of “BALANCE” or “LEVEL,” the test tone is emitted from both speakers simultaneously.
Note
While you are playing a disc, you cannot hear the test tone. Execute the test tone after you stop playback.
To adjust the volume of all the speakers at one time
Use the receiver’s (amplifier’s) volume control.
To return to the default setting
Select the item, then press CLEAR.
Adjusting the speaker volume
1While you stop playback, select “SPEAKER SETUP” after pressing SET UP.
2Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” and “LEVEL” using >/..
During this adjustment, the test tone is emitted from both speakers simultaneously.
4Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
60