Technicolor - Thomson RC5920P manual Loading and Playing Discs, Selecting Discs from the Disc Tray

Playing DVDs

Loading and Playing Discs

Turn on the TV and your DVD Player (press ON•OFF on the player or press the DVD button on the remote control).

				C
			t Caat
		''t			tcc
	n					hh	UU
a
C							pp
						￿

This is an example of a one-sided disc.

			d
		p(Wi escree
tc	h	U	nV
			r
			s
			e
a				i
C			n	o
t
	'n		)
		aC

￿

This is an example of a 2-sided disc. The title is in the center.

1.Press the OPEN•CLOSE button on the front of the DVD Player or on the remote. The disc tray opens.

2.Place a disc gently into the first slot in the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

3.Press the DISC SKIP button on the front of the player to rotate the disc tray. Continue placing discs into the tray as described above. There are 5 discs in the disc tray.

3.Press the OPEN/CLOSE or PLAY button. The disc tray closes.

The DVD Player reads the first disc’s table of contents, and then one of two things happens depending on how the disc was programmed:

•The disc starts playing.

•The disc menu appears on the screen. One of the options will start disc play. Highlight that option and press OK on the DVD remote.

When you stop playing a disc, the DVD player remembers where you stopped. When you start playing the disc again, the player picks up where you left off unless the disc is removed, the player is unplugged, or you pressed the STOP button twice.

Selecting Discs from the Disc Tray

The tray holds 5 discs. To move to the next disc in the tray, press the disc skip button on the front of the player.

You can also select a different disc by pressing one of the numbered DISC SELECT buttons on the front of the player.

Chapter 2 29