Technicolor - Thomson DTH4500 warranty Dolby Digital, Logo registered by, Philips Corp

DTH4500-GB 7/09/00 13:33 Page 15

A udio connections

DConnecting an “advanced”* 5.1 channel Amplifier / Dolby Digital Decoder without a multichannel MPEG-2 decoder and with DTS decoder

Dual connection: digital and analog.

• Select the type of digital audio							GB
output in the set-up menu (see	PCM / BITSTREAM	R2	L2	R2	L2	V2
	DIGITAL AUDIO OUT		ANALOG AUDIO OUT	MIXED AUDIO OUT		VIDEO OUT S-VIDEO OUT
page 16) to deliver:	OPTICAL COAXIAL
			S/W
• in digital: the Dolby Digital as	TV					AV1/TV
		R1	L1 CENTER	R1	L1	V1
a digital data “BITSTREAM”	*				Cinch audio cable
• in digital for the DTS (Digital						(not included)
Theater Sound Systems) signal,	AV1
select DTS ON.
• in analog: the multichannel	Amplifier / Decoder Dolby Digital
MPEG-2 audio signals, as an
analog “PCM” stream.	* Coaxial audio cable or optical digital
			audio cable (not included)

•Then configure the speakers:

-on your DVD player (see pages 37-39) for MPEG-2 audio discs.

-on your Amplifier / Decoder (refer to its documentation) for Dolby Digital discs.

-to read the 5.1 channel MPEG-2 audio discs on a DVD disc, turn on the advanced input (5.1 channel analog) on the amplifier to be able to use the DVD player’s MPEG-2 decoding.

Dolby Digital

“Dolby”, “Dolby Digital”, and the double-D symbol are t r a d e m a r k s o f D o l b y L a b o r a t o r i e s L i c e n s i n g Corporation. Copyright 1992 1997 Dolby Laboratories Inc. All rights reserved.

DTS is a digital Sound compression technique. “DTS” and “DTS Digital” DIGITAL OUT are trademarks of Digital Theater

Systems, Inc.

MPEG	Multichannel	Logo registered by
		PHILIPS Corp.

When connecting the optical audio digital cable:

1. Remove the protection cap from the connector and connect it firmly as shown on the drawing.

2. Keep the protection cap and always reattach the cap when the connector is not in use, to keep it dustfree.

15