Sony DA V-HDX5OO 100Us, Cause and/or corrective action, First, Characters Service Number

•lfyou change the HDMI connection, connect and disconnect the AC power cord (mains lead), or have a power failure, set the [HDMI CONTROL] setting in [CUSTOM SETUP] to [OFF], then set the [HDMI CONTROL] setting in [CUSTOM SETUP] to [ON] (page 90).

•For details on the HDMI CONTROL function, see the HDMI CONTROL Guide (supplied separately).

No sound is output from the system and TV

while using the System Audio Control function.

•Set the IAUDIO (HDMII] setting in ICUSTOM SETUP] to [ON] (page 91).

•Make sure that the connected TV is compatible with the System Audio Control function.

•For details on the System Audio Control limction, see the HDMI CONTROL Guide (supplied separately).

(When letters/numbers appear in the display)

When the self-diagnosis function is activated to prevent the system lix)m malt_mctioning, a 5= character service number (e.g., C 13 50) with a

combination of a letter and 4 digits appears on the TV screen or t>ont panel display. In this case. check the following table.

_,C: li3:5_'_

First 3	Cause and/or corrective action
characters	of
the service
number
C 13	The disc is dirty.
	,,,,l_Cleanthe disc with a soft cloth
	(page 96).
C 31	The disc is not inserted correctly.
	,,,,l_Restartthe system, then re-insert
	the disc con'ectly.
E XX	To prevent a mallilnction, the

(xx is a number) system has perlk_rmed the self- diagnosis flmction.

,,,,l_Contact your nearest Sony dealer or local authorized Sony

sel_.ice facility and give the 5- character ser'.ice ntlnlber.

Example: E 61 10

When displaying the version

number on the TV screen

When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfmlction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.

100Us