Sony DA V-HDX5OO Adjusting the speaker level by using the test tone, G3us, For easy adjustment

•[DISTANCE (SURROUND)]

Tile default distance setting t_)r tile speakers ill relation to tile listening position is shown below. When you set tile distance using the Quick Setup (page 24), tl_e settings is automatically displayed.

0,00 - 7.00 512)/

Be sure to change Ihe value in the Setup Display when you ulove fl_e speakers.

[L/R]Surround speaker distance

3.00 roll0 ffl}:_) from the listening position can

(appears when you be set from 0.00 to 7.00

set [SURROUND] to meters2) (0 to 23 fl). [YES] in the

[CONNECTION]

setting.)

]!When you perform	tile Quick	Setup (page 24), the
default settings are	changed.
2)0.00 to 7.01 meters	for North	American models.

"_)3.(M roll 11ft for Norlh American models.

•Depending on the input stream, tile [DISTANCE] setting may not be effective.

•When the speaker distance setting is not in the recommended range,/_1"//q_. "" m is displayed ("" being the number)./_) indicates over the recommended distance. _1 indicates below.

•[LEVEL (FRONT)]

You can vary tile level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[I/R]	Sel	Ihis between	6.0 dB and
0.0 dB	+6.0	dB.

[CENTER]		Set	this	between	6.0	dB	and
0.0 dB		+6.0	dB.
(appears	when	you
set [CENTER]		to
[YES]	in the
[CONNECTION]
setting.)
[SUBWOOFER]		Set	this	between	6.0	dB	and
+2.0 dB		+6.0	dB.

• [LEVEL (SURROUND)]

You cml vary the level of surround speakers as li!llows. Be sure to set [TEST TONE] to [ONI

for easy adjustment.

[L/R]	Set Ihis between 6.(1dB and
0,0 dB	+6.11dB.
(appears	when you

set [SURROUND]

to [YES] in the

[CONNECTION]

setting.)

To adjust the volume of all the

speakers at one time

Turn tile VOLUME control on tile unit, or press VOLUME +/- on the remote.

• [TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL

(SURROUND)].

[OFF] The test tone is not emitted from the speakers.

[ON] The test tone is emitted from each speaker in sequence while a_liusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjusting the speaker level by using the test tone

1 Press Q DISPLAY when the system is

in stop mode.

Tile Control Menu display appears.

2 Press ,I,/4, to select [SETUP],

then press @.

The options l\)r [SETUP] appear.

continued_

<

O.

O.

&

3

g3us