Protecting a Recorded Cassette
Recording a Programme with Automatic Stop
GB
1 |
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the tab using a small screwdriver.
2To
This function enables you to record up to nine hours of programmes. (LP)
Your VCR stops automatically after the requested length of time.
1 | Switch on the television. |
|
|
2 | To monitor the programme being recorded, select the television |
| channel reserved for use with your VCR (or the AV input if used) |
|
|
3 | Insert the cassette on which the programme is to be recorded, |
| with the window visible and the safety tab intact or the opening |
| covered with adhesive tape. |
GB
3 |
Recording a Programme Immediately
| Result: The VCR is switched on automatically. |
|
|
4 | Select: |
| ◆ The station to be recorded using the PROG/TRK ( or ❷) / |
| PROG ( or ❷) buttons |
|
| ||
★ |
| ||
|
| ||
|
|
| |
CT | INPUT | IPC | INPUT |
VCR |
|
| |
|
|
| |||
|
|
| |||
CT | VCR | INPUT |
| IPC | INPUT |
|
|
|
| ||
|
| 4 |
|
| 4 |
|
|
|
|
| |
|
| DISP./ |
|
| DISPLA |
|
|
|
|
| |
OL | PROG/TRK | RK |
| PROG | |
|
|
| |||
|
| 4 |
|
| 4 |
|
|
|
|
| |
|
| REC |
|
| MENU |
|
| 5 |
|
|
|
|
|
| OK |
|
|
|
| ★ |
|
|
|
|
| SPEED | TV/VCR | TIMER | |
|
| TRK | PROG |
| |
|
| REC | 6 |
| MENU |
Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 18 and 19.
1Switch on the television.
2To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used).
3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.
Result: The VCR is switched on automatically.
4Select:
◆The station to be recorded using the PROG/TRK ( or ❷) / PROG ( or ❷) buttons
or
◆The LINE IN 1 or LINE IN 2
Result: The station number is displayed and the programme can be seen on the television.
5Select the recording speed by pressing the SPEED button as many times as required (See pate 22).
6Hold REC down for a while to start recording.
Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 36).
7To stop recording, press ■ once.
➢◆ If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape.
◆If you reach the end of the tape while recording, the cassette rewinds automatically.
or |
◆ The LINE IN 1 or LINE IN 2 |
source using the INPUT button for a satellite tuner or external |
video source |
Result: The channel number is displayed and the programme can be seen on the television.
5Select the recording speed by pressing the SPEED button as many times as required (See pate 22).
6Hold the REC button down for a while to start recording.
Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 36).
7Press the REC button several times to increase the recording time in:
◆
◆
Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.
8If you wish to cancel the recording before the end, press VCR STANDBY/ON (STANDBY/ON).
☛If the end of the tape is reached while recording:
◆The recording stops
◆The VCR automatically turns off
| 4 |
| 4 |
|
| REPEAT | |
| REPEAT |
|
|
| DISP./ |
| DISPLA |
|
|
| |
OL | PROG/TRK | RK | PROG |
|
| ||
| 4 |
| 4 |
|
|
| |
| REC |
| MENU |
| 5 |
|
|
|
| OK |
|
| ★ |
|
|
SPEED DUB TV/VCR TIMER
LENGTH 2:30
SET LENGTH :
PRESS REC 
24 |
25