Picture Search, Fast Forward/Rewind

Picture Search enables you to Fast Forward or Rewind and look for

a particular part of a tape.	GB

1Press PLAY, the VCR will enter normal play mode. While in play, press and release the ❿❿ (or ➛➛) button. The VCR will search at 5 times the normal playback speed.

2To return to normal playback mode, press the ❿II button.

3If you press and HOLD down the ❿❿ (or ➛➛) button the VCR will search at 9 times the normal speed. Releasing the ❿❿ button will return the VCR to search at 5 times the normal speed. To return to normal playback mode, press the ❿II button.

4Whilst in Picture Search mode, if you press the ❿❿ button again, the VCR will enter normal Fast Forward mode.

5Likewise, whilst in Picture Search ➛➛ mode, if you press the ➛➛ button again, the VCR will enter normal Rewind mode.

6If, when Redwing (➛➛) or Fast Forwarding (❿❿), you press the ➛➛ (or ❿❿) button, the VCR will enter the Picture Search mode.

Searching for a Specific Sequence

Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts.

The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows:

		➞

	Prev	Seq. being	Next
etc.	Seq.	played	Seq.	etc.

2	1	1	2

➢This VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

INTRO SCAN

1To search for a specific index, press INDEX.

2Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located.

3When an Index mark is found the VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.

4If you want to watch the tape from a particular Index, simply press ❿II.

Index Skip Search:

This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the INDEX button.

1 Press the INDEX to start the Index search.

2 Press the ➛➛ or ❿❿ buttons twice more. This will take

you directly to the start of the desired programme is located.

3 These Index searches can be made forwards: (press ❿❿) or backwards: (press ➛➛).

4 To cancel an Index search simply press the ❿II or ■ button.

SHUTTLE