If you wish to Then, SV-640B only | Samsung SV-650X, SV-655X

Using the G-CODE Feature ★(SV-655B/655X/255B Only)

Modifying G-CODE Programming ★(SV-655B/655X/

SV-255B Only)

SPEED	DUB	TV/VCR	TIMER
			1

** TIMER METHOD **

STANDARD

G-CODE

❷ ❿	END:	MENU



	G-CODE
CODE	---------

CODE:0-9CORRECT:➛

END:MENU

PROG	1/JAN MON	21:28
PR DAY	START→ STOP
L1 MO 1 12:00→ 12:50SP
-- ---- --:--→--:----
-- ---- --:--→--:----
-- ---- --:--→--:----
-- ---- --:--→--:----
-- ---- --:--→--:----
❷ ➛❿

DELETE:CLR/RST MENU

Before presetting your VCR:

◆Switch on both the television and your VCR

◆Check that the date and time are correct

◆Insert the cassette on which the programme is to be recorded (safety tab intact)

Up to six programmes can be preset.

1Press the TIMER button.

Result: The TIMER METHOD is displayed.

2Press the corresponding or ❷ buttons, until the G-CODEoption is selected.

3Press the ❿button to select G-CODE.

Result: A message is displayed to allow you to enter the G-CODE code.

☛If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 29 if you wish to cancel a preset recording.

4Press the numeric buttons to enter the code opposite the pro- gramme that you wish to record in your television magazine.

➢ If you wish to correct the G-CODE code that you are entering:

◆Press the ➛ button until the digit to be corrected is cleared

◆Enter the correct digit

5Press the MENU button.

Result: The information concerning the programme is displayed.

☛When using the G-CODE function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the or ❷ buttons. Refer to the following page if:

◆The programme number or times flash

◆You wish to modify the programme

6If the programme and times are correct, press the MENU button.

7Press the VCR STANDBY/ON (STANDBY/ON) button to activate the timer.

Result: The Timer indicator () is displayed.

☛If no cassette has been inserted when you press

VCR STANDBY/ON (STANDBY/ON) the Timer indicator flashes. If the safety tab on the cassette has been broken, the cassette is ejected. Insert the appropriate cassette.

8Refer to page 29 if you wish to:

◆ Check that your VCR has been programmed correctly ◆ Cancel a preset recording

☛The numbers next to each TV programme listing are G-CODE code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the G-CODE code for the programme you wish to record.

™G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is manufactured under licence from Gemstar Development Corporation.

If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm.

If you wish to...	Then...

Select an input source other	◆	Press the ➛ or ❿ buttons, until the PR selection flashes.
than the tuner LINE IN 1 or LINE IN 2 input	◆ Press the INPUT button one or more times to change the
		input source selection.
	➢ The input source must be selected before changing any
			other value.
Record a programme every day	◆	Press the ➛ or ❿ buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time	◆ Press the or ❷ buttons, until the DLY (Daily) value is
		displayed.

Record a programme every week	◆	Press the ➛ or ❿ buttons, until the DAY selection flashes.
on the same day and at the same time	◆ Press the or ❷ buttons, until the W- (Week) value is
		displayed, followed by the required day.
		Example: W-SA(Weekly Saturday)

Extend the recording time	◆	Press the ➛ or ❿ buttons, until the STOP selection flashes.
	◆ Press the or ❷ buttons to increase or decrease the stop
		time.

Select the recording speed	◆	Press the ➛ or ❿ buttons, until the recording speed selection
★(SV-640B only)		flashes.
	◆ Press the or ❷ buttons until the correct indication is
		displayed:
		• AUTO (Auto Tape Speed Select) : see page 28
		•	SP (Standard Play)
		•	LP (Long Play)

If you wish to...

Then...

★(SV-640B only)