Sound

Preparation

– Digital output

●Digital output selection enables you to specify the type of digital output suitable for your receiver.

●Select All (default setting), if you had connected your COAXIAL / OPTICAL AUDIO OUT to a multichanel decoder receiver.

●Select PCM only if your receiver is not capable of decoding multichannel audio.

●Select Off to deactivate the COAXIAL /

OPTICAL AUDIO OUT.

– Analog output

Select Stereo, Dolby Surr-compat (Dolby Surround compatible) or 3D Sound (Trusurround) output to match your system’s playback capability.

– Night Mode

When set to On, the dynamics of your sound output are optimized. High volume outputs are softened, enabling you to watch your favorite action movie, etc. without disturbing others.

– Karaoke vocal

Put this setting to On only when a multi-channel karaoke DVD is being played.The karaoke channels on the disc will then be mixed into a normal stereo sound.

– Sub-woofer Cut-off

The frequency of the subwoofer output can be set to High (200Hz) or Low (100Hz) to match your system’s playback sound quality.

– PCM Output

Allows to select PCM digital output between 48kHz and 96kHz. When 48kHz has been selected, 96kHz (if available on disc) PCM data stream will be converted to 48kHz.

Some 96kHz DVD are copy protected. If your PCM output selection is 96kHz, the digital output will be muted to comply with the standards. Select 48kHz to enable digital output.