Special VCD & Svcd Features, General Features

Operation

Subtitles

1Select Z in the menu bar or press SUBTITLE on the remote control directly.

2Press SUBTITLE or 3/4 repeatedly to select the different subtitles.

Special VCD & SVCD Features

Playback Control (PBC)

1Load a Video CD with PBC and press PLAY.

2Go through the menu with the buttons indicated on the Video monitor until your chosen passage starts to playback. If a PBC menu consists of a list of tracks, you can select a track directly.

3Enter your choice with the numeric buttons.

4Press RETURN/RESUME to go back to the previous menu, if applicable on the menu.

5You may also select PBC off under Personal Preferences.

➜ When set to off, PBC menus are not activated for further playback.

Note:

When PBC is on, you cannot operate resume, shuffle, repeat, A-B repeat, scan, time search and FTS.

Special CD & MP3 Features

CD text and MP3 text

1Some CD or MP3-CD discs may contain text information (eg. track name, album name, artist name etc.) which will appear on the front display and video monitor during playback.

2By default, CD text display is set to ON.

3To switch off the CD text display, press CD TEXT/BIT RATE during playback.

4Press CD TEXT/BIT RATE again to switch on the text display mode.

General Features

Note:

–Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the Video monitor.

Moving to another title/chapter

DVD VCD

When a disc has more than one title/track or chapter, you can move to another title/chapter as follows:

1Press ON SCREEN, then select W or X in the menu bar.

2Press 34 or numeric buttons to select a title/ chapter.

1Press T or S briefly during playback to go to the next track or to return to the beginning of the currect track respectively.

2Press S twice briefly to step back to the previous track.

3To go directly to any track, enter the track number using the numeric buttons.

Note:

– Long press of the T or S will switch on backward or forward search (see serch section).

Search

DVD VCD

1Select in the menu bar and press 4.

2Use 1/2 to select the required speed: –32, –8 or –4 (backward), or +4, +8, +32 (forward).

3Select 1 or press PLAY to play the disc at normal speed again.

●To exit the search mode, press 3. (Playback continues at the selected speed.)

●To search forward or backward through different speeds, you can also hold down T or S for more than two seconds.