Preparation
Video connections
If your AV receiver features video output jacks, connect this unit to the AV receiver (and then to your TV). This enables you to use one TV for several different video sources (LD, VDR etc.) by simply switching the input source selector on your AV receiver.
This unit features four types of video output jacks (Component, Video,
Y | PB/CB PR/CR | VIDEO | S VIDEO |
| |
COMPONENT IN |
| ||||
| IN | IN |
| ||
|
|
|
| ||
| AV receiver |
| |||
|
|
|
|
| S VIDEO OUT |
| PB/CB PR/CR |
|
| ||
| Y |
|
| VIDEO |
|
|
|
|
|
| |
COMPONENT OUT |
| OUT |
| ||
|
|
| |||
|
|
|
| VIDEO | S VIDEO |
|
|
|
| IN | IN |
COMPONENT IN |
|
|
|
| |
| PR/CR |
| TV |
| |
| PB/CB |
|
|
| |
|
| Y |
|
|
|
SCAN MODE selector
This selector switches the type of output signal from the COMPONENT VIDEO OUT jacks on this unit.
INTERLACE: |
Select INTERLACE if you are connecting the component to a standard (interlace format) TV.
PROGRESSIVE:
Select PROGRESSIVE if your TV accepts NTSC progressive or PAL progressive signals. This setting will enable you to enjoy accurate color reproduction and high quality images. This unit features DCDi circuit. The PROGRESSIVE indicator on the front panel lights up during progressive playback.
Notes:
–In the PROGRESSIVE mode, 4:3 aspect images are stretched horizontally on the wide screen TV. We recommend to change the TV screen’s aspect ratio settings for progressive signals if you wish to watch the original aspect ratio images without distortion. You can also change the aspect ratio settings in the [4:3 Aspect] parameter in the
–Some TVs and projectors are not compatible with this unit. If you notice picture distortion when outputting the progressive signals, switch the SCAN MODE selector to
INTERLACE.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR VIDEO MONITOR COMPATIBILITY WITH THIS MODEL 525P AND 625P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of YAMAHA products, including the projectors
Switching on
1Connect the AC power cord to the power outlet.
2Switch on the TV and this unit.
3Set the TV to the correct Video IN channel. (e.g. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. refer to your TV owner’s manual for detail.)
➜The front panel display lights up and the default screen appears on the TV.
4If you are using an external equipment (e.g. audio system or receiver), turn them on and select the appropriate input source that was used to connect to this unit. Refer to the equipment owner’s manual for detail.
Note:
– If you do not have a proper picture or sound, refer to “Troubleshooting” section.
8