CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1To assure the finest performance, please read this man- ual carefully. Keep it in a safe place for future reference.
2Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free space all around this unit
for adequate ventilation.
3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause
an electrical shock, fire, damage to this unit, and/or per- sonal injury.
5Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:
–Other components, as they may cause damage and/or discoloration on the surface of this unit.
–Burning objects (i.e., candles), as they may cause fire, damage to this unit, and/or personal injury.
–Containers with liquid in them, as they may fall, spilling the liquid and causing an electrical shock to the user
and/or damage to this unit.
6Do not cover this unit with a newspaper, tablecloth, cur- tain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire, dam- age to this unit, and/or personal injury.
7Do not plug in this unit to a wall outlet until all connec- tions are complete.
8Do not operate this unit
9Do not use excessive force on switches, knobs and/or cords.
10When disconnecting the power cord from the wall out- let, grasp the plug; do not pull the cord.
11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
12Use only the voltage specified on this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury.YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
13To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.
14Do not attempt to modify or fix this unit. Contact quali- fied YAMAHA service personnel when any service is needed.The cabinet should never be opened for any reason.
15When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet.
16Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.
17Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet.
18Place this unit on a flat, hard and stable surface.
19There must be sufficient room in front of the player for the disc tray to be opened.
20The mechanical parts of the set contain
The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off.This state is called the standby mode.In this state, this unit is designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
NOTE:
Pictures shown maybe different between countries.
Never make or change connections with the power switched on.
When playing DTS encoded CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.
LASER DIODE PROPERTIES
Type | Semiconductor laser GaAlAs |
Wave length | 650 nm |
| 790 nm (VCD/CD) |
Output Power | 7 mW |
DANGER
This unit emits visible laser radiation when open. Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc tray and other openings or look inside.
iii