Introduction
Supplied accessories
Check your package to make sure it contains the following items:
Remote control | Batteries (x2) |
| (AA, R6, |
carefully. Different types of batteries may be the same shape or color.
•If the batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Using the remote control
Remote control
sensor
Point the remote control at the sensor, within approximately 6 m (20 feet) of the unit.
30° | ° | |
30 | ||
|
English
Audio/Video cable | Power cable |
Installing batteries in the remote control
Insert the batteries in the correct direction by aligning the
+and – marks on the batteries with the polarity markings (+ and
Handling the remote control
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity such as near a bath
–high temperature such as near a heater or stove
–extremely low temperature
–dusty places
1Remove the back cover.
2Insert the two supplied batteries (AA, R6,
3Close the back cover.
Replace worn batteries
Worn batteries limit the operating range of the remote control. Replace both batteries at the same time.
•Replace both batteries if you notice a decrease in the operating range of the remote control.
•Do not use old batteries with new ones.
•Do not use different types of batteries (such as alkaline and manganese) together. Read the battery packaging
Maintenance
Cleaning the cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution that contains alcohol, spirits, ammonia or abrasives.
Cleaning discs
•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.
•Do not use solvents such as benzene, thinner, commercial cleaners, or
3