Sears 934.4482639 owner manual ohm Coaxial Cable Not supplied

Usethisconnectionif yourcablesystemconnects directlytoyourTV/VCRwithoutaconverterbox. Withthisconnectionyou1)canuseyourTV/VCR RemoteControltoselectchannels2)programone or moreunscrambledchannelsfor unattended recording.

If your cable service supplies you with a converter box you can use the basic connection shown here.

From Cabl6 System

_._l_ CATV Box,,(Notsupplied)

From Cable System

75-ohm
Coaxial Cable	/"F']	_	I_]_
(Not supplied)	L____

c5aOiha/Cable fl _ _ 13J"

-©©	With this connection you can record and view any
	channel including scrambled channels. However
	channel selection must be made at the cable com-
	pany converter box. This means that channels
	cannot be changed using the TV/VCR Remote
	Control. Unattended recording is limited to one
	channel at a time.

_ II_i'JI [_o_

When using an external input signal, connect the

audio/video cable to the AUDIO IN, VIDEO IN jacks. To use the external input jack, selet the AUX position. Press CH. "A" or "V" button or enter "00"

with number button so that AUX appears on the screen.

AUX

TO RECORD AND VIEW A SCRAMBLED/UN-

SCRAMBLED CHANNEL

1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box. (Ex. CH3)

2.Select the channel to be recorded or viewed on the Cable Converter Box.

Note to CATV system installer

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

-11-