Inserting a Cassette, Removing a Cassette

Storethecassettein itscaseasshown.

ThisTV/VCRwill operatewith artycassettethat hastheVHSmark.Forbestresultswerecommend

theuseofhigh-qualitytape.

•Donotusepoorqualityordamagedtape.

Thetablebelowshowstherecording/playback

timeusingT-60,T-120orT-160tapein theSP,LP orSLPmode.

MODE			CASSETTE
		T-60	T-120	T- 160
SP Mode	1 hour		2 hours	2-2/3
				hours
LP Mode	2	hours	4 hours	5-1/3
				hours
SLP Mode	3	hours	6 hours	8 hours

When handling video tapes, take the following precautions

•Avoid moisture, which can condense on the

tape if it is moved from a cold place to a warm place. Playing a tape that has moisture in it will damage the tape and your TV/VCR. Before using a tape with these conditions, wait until

the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and mag- netic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push

in gently, but continuously, on the center-back of

the cassette until it is drawn completely into the TV/VCR.

TV/VCR is automatically turned on when the cassette is properly inserted.

REMOVING A CASSETTE

Press EJECT button on the main unit or on the remote control unit.

ERASE PREVENTION

You may prevent accidental erasing of a tape by breaking off the tab on the back edge of the cas- sette. If you decide to record on the tape again, cover the hole with plastic tape.

STOP/EJECT

I I

EJECT

When the cassette stops moving, pull the cassette

out of the cassette compartment and store it prop- erly.

Insert the cassette into the TV/VCR as shown.

CORRECTWRONG

-16-