Yamaha Yamaha DVD Changer Getting Started, Using the remote control, Handling the remote control

Getting Started

Step 1: Inserting batteries into the remote control

3

1

2

1Open the battery compartment.

2Insert the two supplied batteries (AA, R06, UM-3) following the indications (+/–) inside the compartment.

3Close the cover. Notes:

–Insert batteries correctly according to the polarity markings (+/–). The batteries inserted in the opposite direction may leak.

–Replace the exhausted batteries immediately with new ones to prevent a leakage.

–Remove the batteries from the compartment if the remote control is not used for more than a month.

–If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

–Do not use old batteries together with new ones.

–Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

–Dispose of the batteries correctly in accordance with your local regulations.

Using the remote control

		Remote control
			sensor
Point the remote control	at
the remote control sensor,
within approximately 6 m
(20 ft) from the unit.		30°		°
					30

Handling the remote control

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of

conditions:

–places of high humidity, such as near a bath

–places of high temperature, such as near a heater or stove

–places of extremely low temperatures

–dusty places

8En